Updating the SE-P14 & SE-P24 Navigation SD Card

The SE-P14 and SE-P24 navigation cards are designed for use with the Stinger Heigh10, Heigh10+, Horizon10, and Horizon12 radios. Please follow the steps below to update the cards.

Update Procedure

1. Initialize the Card: With the radio powered off, insert the SD card into the slot (Figure 1). Turn on the radio and press the NAV icon. Follow the on-screen prompts to initialize the card, then power off the vehicle to shut down the radio.
2. Access the Toolbox: Remove the card and insert it into your PC. Visit Naviextras.com and register an account.
3. Search for Device: Once logged in, search for "Stinger." Select UN1880 for the SE-P14 card, or IX210 for the SE-P24 card. Click Continue after the "successful" prompt.
4. Complete Registration: Follow the prompts to fill out your details. You will need to confirm your email address via the link sent to your inbox.
5. Download and Update: Click the end-user link to download the Toolbox. Follow the on-screen video tutorials and guides within the software to complete your map update.

Note: If you encounter issues during this process, please reach out to Naviextras directly for further technical support.

Figure 1

Search Keywords:  igo, "gps update"