Matthew Calderon

If you have both issues, the radio and PAC data interface connectors may be swapped. On the PAC interface, find the Radio Harness connector, labeled at the bottom. It should not have any RCA jacks....

If your contacts didn't import with Android Auto, it may be due to missing permissions or a setup glitch. To import contacts, follow these steps.Delete the phone from the radio.Delete the radio fro...

If the gauges are only partially working, this may be due to missing CAN data information. To solve this problem, reset the PAC RadioPro CAN data interface. There are two different methods for rese...

To pair your Stinger radio to your phone, follow these steps.Navigate to the Bluetooth settings on the mobile device.Locate the Stinger radio in the Bluetooth list and then select it to pair.When t...

Unplug all connections from the dashcam.Unplug the rear camera and then plug it back in firmly, ensuring that the camera is plugged in all the way. This is most likely the cause of the problem.Plug...

In Bose-equipped vehicles, all audio components are connected in a loop. Missing any component causes no sound. The included jumpers in the kit bypass unused audio components, specifically the exte...

If the radio doesn’t activate the backup camera screen when the vehicle is in reverse, it may indicate that the reverse wire has not been properly connected. On the radio-side harness of the PAC in...

If the steering wheel Voice button doesn't activate Google Assistant or Siri, try these troubleshooting steps.Applicable part numbers: RB10F15009X, RB10F15009HP, RB10F15009, STH10F150B Inspect the ...

If you bought any of these parts from Autozone and need the instruction manual, find your interface in the links below.Search Keywords: c4rad, sc4rad, azch11,  azfd11, azgm11, azgm31, ssch11, ssfd1...

Some Stinger radio kits* include a video filter called the RPA-VA1. Without it, the backup camera image won’t display because the connection is interrupted. Ensure the RPA-VA1 is properly connected...