Matthew Calderon

To add a camera(s) to a Heigh10+, Horizon10, or Horizon12, follow these steps. InstructionsConnect the power and ground from the camera(s) to the kit's power and ground wires labeled Aftermarket Ca...

To add a camera(s) to a Heigh10+, Horizon10, or Horizon12, follow these steps. InstructionsConnect the power and ground from the camera(s) to the kit's power and ground wires labeled Aftermarket Ca...

If both issues occur, the radio and PAC module connectors might be swapped.Applicable part numbers: RB10RUN10, RB10TAC16B, RB10TUN14, STH10HIGH18 On the PAC module, locate the Radio Harness connect...

If your contacts didn't import with Android Auto, it may be due to missing permissions or a setup glitch. To import contacts, follow these steps.Delete the phone from the radio.Delete the radio fro...

To pair your Stinger radio to your phone, follow these steps.Navigate to the Bluetooth settings on the mobile device.Locate the Stinger radio in the Bluetooth list and then select it to pair.When t...

If the dashcam reboots, follow these steps to correct the issue. Installation stepsUnplug all dashcam connections.Disconnect, then firmly reconnect the rear camera, ensuring it's fully plugged in.R...

In Bose-equipped vehicles, all audio components are connected in a loop. If an audio component is missing, you will not have sound. For this reason, the kit provides jumpers to remove unnecessary a...

If the radio doesn’t activate the backup camera screen when the vehicle is in reverse, it may indicate that the reverse wire has not been properly connected. On the radio-side harness of the PAC in...

If you bought any of these parts from AutoZone and need the instruction manual, find your interface in the links below.Applicable part numbers  C4RAD, SC4RAD, AZCH11,  AZFD11, AZGM11, AZGM31, SSCH1...

Some Stinger radio kits* include a video filter called the RPA-VA1. Without it, the backup camera image won’t display because the connection is interrupted. Ensure the RPA-VA1 is properly connected...