This legacy firmware is for Heigh10 radios only and should be used only when directed by Stinger Technical Support. It is compatible only with Heigh10 “non-X” models.
The version of the Stinger radio can be verified in two different ways
-
If Skytraq (circled in red) is shown on the System Information screen, you have an “X” version. The legacy firmware will not work with this radio.
settings / system settings / installer settings (0052) / system information
-
You can also verify the version by the revision number on the radio chassis. If it ends in X (circled in red), you have an “X” version. The legacy firmware will not work with this radio.
Legacy firmware files:
Firmware Option 1: 1-11-23 V10 Firmware (1)
Firmware Option 2: 7-21-22 Firmware (1)
Firmware Option 3: 9-18-21 Firmware (1)
Firmware Option 4: (Wrangler JK only) 1-11-23 V11 Firmware (2)
Firmware Notes:
(1) This firmware cannot be used with a Jeep Wrangler JK with a fully integrated kit
(2) This firmware is only for a Jeep Wrangler JK with a fully integrated kit.
Update Instructions:
Click here for instructions on how to update the Heigh10.
Click here for a walkthrough video on how to update the Heigh10.
Comments
0 comments
Article is closed for comments.