Heigh10: Firmware Update

This article contains the latest firmware for your Heigh10. The following firmware is only for the Heigh10 "X" version radios.

A Heigh10 X version can be verified in two different ways:

• If Skytraq (circled in red) is shown in the System Information screen, you have an “X” version.

  settings / system settings / installer settings (0052) / system information

• You can also verify the version by the revision number on the radio chassis. If it ends in X (circled in red), you have an “X” version.

Here is a link to a video tutorial on the firmware update process. Please know the Stinger website has changed since the making of this video.

Current Firmware

Version 06-24-2024

• No details provided

Legacy Firmware

• Please see this article for legacy firmware on non-X radios.

USB Drive Requirements & Setup

• A name-brand USB 2.0 drive no larger than 32GB.
• The USB drive must be formatted to FAT32.
• No files should be on the USB drive aside from the firmware.