Matthew Calderon

Stinger tech support helps with installation, troubleshooting and product questions. Customer support helps with orders, refunds and exchanges. This article explains how to reach each team and how ...

The links below provide manuals for Stinger radios. These are not the vehicle-specific kit manuals. For those manuals, please visit the product page. The product registration form is also listed he...

If Apple CarPlay or Android Auto isn't working after you install this radio kit in a Jeep Gladiator JT or Wrangler JL / JLU, work through the checks below in order.Applicable Products: RB10JW18Trou...

For manual-transmission Wrangler JKs, cut the reverse trigger wire due to the Jeep’s reverse-circuit design. InstructionsPlug-and-Play kits: With these setups, you need to modify the radio harness ...

If the tire pressure monitoring system (TPMS) is not working or 2 sensors read 255psi, the PAC module must be updated. The following instructions explain how to perform the update.Applicable part n...

Before installing the Stinger IE268 radio, remove the metal mounting sleeve.Applicable part numbers: STGCD641DDB, STGCD651DDB, STG-CHA68, STG-FMK542RPDDB, STG-GM4101, STG-TOYK973, STH68FD, STH68GM1...

This article explains how to add the SwitchHUB to a Stinger radio equipped with trigger outputs.Applicable radios: Heigh10+, Horizon10, Horizon12, SPXM1 Installation StepsGrounding: Connect a prope...

The SwitchHub is a solid-state relay hub with 4 independent outputs: one 40-amp and three 20-amp, totaling 100 amps of continuous current. Each output can be triggered independently by positive or ...