Matthew Calderon

The following are the settings for the STR4KE mirror monitor. To access the setting menu press the cog wheel. Video ResolutionResolution for the front / rear cameras1080P x 1080P2K x 1080P2K x 2K4K...

If you are experiencing difficulties configuring and using the dashcam, please follow these troubleshooting steps.Applicable part numbers: SDC-2CHFHD, SDC-2CH2KQHD No powerIs the dashcam powered on...

All Stinger radios feature an internal microphone and do not require an external one, except for the Horizon12.Note: For Horizon12 installations, the microphone is integrated directly into the kit'...

Very often, we get tech inquiries about problems that arise after an AmpPRO is installed. However, 99% of the time, the AmpPRO isn't the problem at all. Realistically, an AmpPRO is a very simple de...

For the STH68JK radio kit, a speaker connector must be chosen for either Amplified or Non-Amplified. The kit comes with the connector unplugged, so there is no audio if no connection has been made....

The DIP switches on PAC interface modules are product-dependent. These switches dictate module behavior and identify the specific radio or vehicle for the installation.Important: Always refer to th...

This article provides the latest IE 268 radio firmware and update instructions.  Download the latest firmware at the bottom of the page. Unzip the firmware file, then go into the sub-folder to find...

The following are common questions and FAQ’s regarding the Stinger Opsis dashcam.Applicable part numbers: SDC-2CH2KQHD, SDC-2CHFHD  The dashcam works out of the box with the default settings to pro...

If you are retaining the factory backup camera, please be aware that this camera has a limitation. GM designed the camera to operate exclusively while the vehicle is in reverse. If you wish to view...

In certain Jeeps, you may find that the camera guidelines are missing. This is because Jeep has started using a new camera. The PAC camera module (RPA-HD1) must be updated. Follow the steps below t...