Matthew Calderon

If Sirius radio isn’t working, follow these steps to figure out why. Is the SiriusXM icon on the radio grayed out? Did you purchase a SiriusXM tuner? A SiriusXM tuner is required to retain SiriusXM...

If the kit is working except for SWC (steering wheel controls), follow these steps to correct the issue. This article assumes the controls worked with the factory radio before it was removed.If you...

This article contains the latest firmware for your Heigh10. The following firmware is only for the Heigh10 "X" version radios.A Heigh10 X version can be verified in two different ways: If Skytraq (...

This article provides the latest and all previous firmware versions for your HORIZON12 radio, including a revision history.  Here is a link to a video tutorial on the firmware update process using...

If the kit is not working properly or the factory camera quits working, try these steps to fix the issue.Open the hood and locate the fuse box next to the battery. Remove the radio fuse for 5 secon...

The SE-P14 and SE-P24 navigation cards are designed for use with the Stinger Heigh10, Heigh10+, Horizon10, and Horizon12 radios. Please follow the steps below to update the SE-P14 and SE-P24 cards....

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified.Connect the speaker wires.Locate the speaker connector harness from the PAC inte...

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified.Connect the speaker wires.Locate the speaker connector harness from the PAC inte...

When installing these kits, the dash bezel sometimes won't snap into place without excessive force. Removing two tabs on the back of the dash bezel, as shown below, makes installation easier.Applic...

This tutorial is for wiring and configuration for the Stinger EM-JP-CAM, HDCAM10U, HDCAMJW, PHD220, and PHD5N1 cameras.Before power is applied to the camera the jumper loops must be configured.Blue...