Matthew Calderon

For manual transmission vehicles, cut the reverse trigger wire when installing the RP4-CH11 module or SR-JK11H kits due to Jeep's reverse circuit design.Plug-and-Play kits applications: With these ...

If you cannot hear the person on the call, follow the steps below to sort out the problem.Is the correct speaker connector plugged into? If the wrong connector was used, simply connect to the corre...

If Sirius radio isn’t working, follow these steps to figure out why. Is the SiriusXM icon on the radio grayed out? Did you purchase a SiriusXM tuner? A SiriusXM tuner is required to retain SiriusXM...

If the kit is working except for SWC (steering wheel controls), follow these steps to correct the issue. This article assumes the controls worked with the factory radio before it was removed.If you...

This article contains the latest firmware for your Heigh10. The following firmware is only for the Heigh10 "X" version radios.A Heigh10 X version can be verified in two different ways: If Skytraq (...

This article provides the latest and all previous firmware versions for your HORIZON12 radio, including a revision history.  Here is a link to a video tutorial on the firmware update process using...

If the kit is not working properly or the factory camera quits working, try these steps to fix the issue.Open the hood and locate the fuse box next to the battery. Remove the radio fuse for 5 secon...

The SE-P14 and SE-P24 navigation cards are designed for use with the Stinger Heigh10, Heigh10+, Horizon10, and Horizon12 radios. Please follow the steps below to update the SE-P14 and SE-P24 cards....

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified.Connect the speaker wires.Locate the speaker connector harness from the PAC inte...

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified.Connect the speaker wires.Locate the speaker connector harness from the PAC inte...