Matthew Calderon

If you encounter a situation where there is no audio output, and you find that toggling the key restores the audio, follow the steps outlined below to resolve this issue.Identify the Blue/White wir...

The LPH T-harness allows you to install aftermarket amplifiers without modifying the factory harness. The LPH T-Harness is intended for use with a line output converter (LOC), but can also be conne...

This article contains the latest firmware for the Heigh10 radio. This firmware is only for the Heigh10 "X" version radios. Radio VerificationA Heigh10 X version can be verified in two different way...

This article provides current and legacy firmware for the HORIZON12 radio, including revision history. Note: Watch the video tutorial to guide you through the firmware update process. Befor...

If the kit is not working properly or the factory camera stops working, try these steps to fix the issue. Open the hood and locate the fuse box next to the battery. Remove the radio fuse for 5 seco...

The SE-P14 and SE-P24 navigation cards are designed for use with the Stinger Heigh10, Heigh10+, Horizon10, and Horizon12 radios. Please follow the steps below to update the cards.Update Procedure ...

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified. Installation InstructionsConnect the speaker wiresLocate the speaker connector ...

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified. Installation InstructionsConnect the speaker wiresLocate the speaker connector ...

This tutorial is for wiring and configuration of the Stinger EM-JP-CAM, HDCAM10U, HDCAMJW, PHD220, and PHD5N1 cameras. Before power is applied to the camera, the jumper loops must be configured.Blu...

The Stinger amplifier's gain dial should be matched to the source level. This tutorial uses the Stinger MT-1000.1, with input sensitivity from 0.2V (min) to 6V (max). Know the source voltageThe RCA...