Matthew Calderon

The following are common questions and FAQ’s regarding the Stinger Opsis dashcam.Applicable part numbers: SDC-2CH2KQHD, SDC-2CHFHD The dashcam works out of the box with the default settings to prot...

If you are retaining the factory backup camera, please be aware that this camera has a limitation. GM designed the camera to operate exclusively while the vehicle is in reverse. If you wish to view...

In certain Jeeps, you may find the camera guidelines are missing. This is due to a new camera that Jeep has started using. The PAC camera module–RPA-HD1–must be updated. Follow the steps below to u...

If you encounter a situation where there is no audio output, and you find that toggling the key restores the audio, follow the steps outlined below to resolve this issue.Identify the Blue/White wir...

The LPH T-harness allows you to install aftermarket amplifiers without modifying the factory harness. The LPH T-Harness is intended for use with a line output converter (LOC), but can also be conne...

If the kit is not working correctly, please follow these steps to resolve the issue.Applicable Kits: JK11RB12, SRK-JK11H, SRK-JK11HX, SRX-JK11128, RB10JK11K, RB10JK11HP, RB10JK11XOpen the hood and ...

If the kit is functioning properly except for the climate control information not displaying correctly on the radio, please follow these steps to resolve the issue.Applicable Kits: RB10RAM13, RB10R...

If some of the gauges in the radio are not working, this is caused by the PAC CH1A-SRK module losing partial communication with the vehicle. A temporary fix to get the gauges working again is reset...

For manual transmission vehicles, cut the reverse trigger wire when installing the RP4-CH11 module or SR-JK11H kits due to Jeep's reverse circuit design.Plug-and-Play kits applications: With these ...

If you cannot hear the person on the call, follow the steps below to sort out the problem.Is the correct speaker connector plugged into? If the wrong connector was used, simply connect to the corre...